- Home
- Equipment
Refine by
Mass Aritma Environmental Equipment & Supplies
11 equipment items found
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
In water and wastewater treatment plants, flow control in channels is achieved using penstocks. MASS's channel-mounted penstocks are rectangular covers made of carbon steel or stainless steel, designed for this purpose. Sealing is achieved using P, V, and double-lip rubber seals on three sides of the penstocks, resulting in very low leakage rates of 0.4 liters/min per meter of seal length. MASS ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
Circular screens and screening presses are effective equipment used to remove solid materials from wastewater streams. Circular grids and screening press bars are placed in the channel with the concave part facing the flow. The tangential placement of the bars on the channel bottom facilitates the movement of solid materials in the wastewater towards the grids and screening ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
Circular grit traps are used to retain heavy solid particles in wastewater that, if not removed, settle in the aeration and sedimentation stages of the treatment system and cause blockages in pipes during low flow times. These types of grit traps are small and used in various configurations. In circular grit traps, wastewater enters the tank tangentially and exits radially. With the help of a ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
In wastewater treatment plants, aeration and mixing in biological reactors are provided by aerators. Aerators are designed in a wide operating range and with different capacities, depending on the oxygen requirements of the systems. In tanks with variable water levels, pontoon systems are mounted on aerators to enable them to adapt to water level ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
Wall-mounted penstocks are used in tank and pool structures in water and wastewater treatment plants to control flow and provide insulation. Sealing is achieved by using P, V, and double-lip type rubber seals on all four edges of the penstocks, resulting in very low leakage rates of 0.4 liters/min for a 1 m seal length (under 5 m on-seat or 4 m off-seat pressure). Wall penstocks are available in ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
Rectangular grit separators, both aerated and non-aerated, are commonly used in wastewater treatment systems. Scraper systems are used to remove the solid material that settles at the bottom of these grit separators. Scrapers moving bi-directionally along the grit separator push the grit into a chute at the bottom of the channel, from where it is removed from the tank by air-lift or submersible ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
Suspended solids in wastewater settle to the bottom under stagnant conditions. To ensure the proper and efficient removal of this accumulated sludge, it must all be collected at a single point. Scrapers are equipment developed for this purpose and are indispensable components of sedimentation tanks in wastewater treatment plants. In half-bridge scrapers, the scraper bridge and bottom blades move ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
The sedimentation process, an indispensable part of wastewater treatment, is sometimes carried out in rectangular tanks. In this case, the sludge that settles at the bottom needs to be scraped towards the sludge cones located at the inlet of the sedimentation tank. The scraper systems used for this purpose consist of a bridge scraper system that can move in two directions along the tank. ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
Horizontal shaft aerators hold a significant place among surface aerators used to meet the aeration and mixing needs in biological wastewater treatment systems. Due to their low energy costs and effective mixing and oxygen transfer, horizontal shaft aerators are widely used, particularly in trench-type aeration ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
Mixers have a wide range of applications in both wastewater treatment plants and drinking water treatment plants. They are used at all scales, from the smallest package treatment plants to large city treatment plants. In these types of mixers, produced at 30 or 120 rpm for environments up to 10,000 cps, the shaft is connected to the gearbox output with an elastic coupling. The mixer is mounted to ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
Flocculants are widely used in the flocculation stage of drinking water treatment and industrial wastewater treatment plants. They are designed with velocity gradients selected in the range of 40 – 100 sec ...